top of page

FC-10 Ai
FAN CONTROL

     Our adjustable FC-10Ai controller wires directly to your electrical engine temperature gauge to operate your cooling fan.  This is especially  convienent  when you have only one opening at your water jacket which is already used by the temp gauge. No additionally relay is required as the FC-10 has a built-in 40 ampere relay to supply battery power to your radiator fan motor. 

    You can adjust the FC-10Ai for a comfortable operarating engine temperature or you can have your A/C unit operate the cooling fan in conjunction with the FC-10Ai.

$95.00

Jeg's Logo.jpg
summit Racing Logo.png

AMERICAN
QUALITY

Our harnesses use high temperature color coded and labeled GXL wires. Kits normally include this PDP-1 fuse panel

PDP-3 FUSE PANEL

3.5"x3.5"

This tiny automotive fuse panel uses miniature ATM plastic fuses to reduce the room needed to wire your vehicle. The PDP-3 uses lugless connectors which allow you to modify your wiring as needed. No crimp-on  terminals are needed. 

Instructions and mounting hardware are provided.

pdp3back_edited_edited.jpg

The panel is divided into 3 sections including:

  • BATTERY

  •  IGNITION (KEY-ON)

  • ACCCESSORY

$49.95

AP-1  Compact Fuse Panel



 

The AP-1 has 8 fused output terminals connected to a singe power post PLUS an additional 8 terminal  ground strip. This is especially useful in fiberglass vehicles or motorcycles

Total current capacity is 60 amperes.  

INSTRUCTIONS INCLUDED

3" x 2.5"
stainless steel

$52.95

Call (610) 754-0720
to order

AP-2 Compact
Fuse Panel

The AP-2 is a compact dual fuse panel. Normally, one section stays hot while the second is "switched". 
Additionally, there is an 8 position GROUND strip to ease grounding on fibreglass bodies.


Instructions included

3" x 2.5"
stainless steel

Current capacity is
60 amperes

$54.95

pdp1front_edited.jpg

PDP-1  FUSE   PANEL

This stainless steel fuse panel contains 13 ATC fuses with 25 fused output terminals labeled for standard vehicle electrical  requirements. Additional fused outputs are provided for your hazard and turn signal flashers plus horns.

Wires connect to the fuse panel via lugless terminal strips much like your home circuit breaker panel.

General instructions are included

$129.50

K20/k40 CUSTOM  KITS

The K-20 and K-40 Kits are configured for your application. These kits include the PDP-1B stainless fuse panel plus the headlamp, and dimmer switches. A dash mounted ignition switch comes with the K-40 Kit. The PDP-1L fuse panel is available for LED lamp installations

HEADLAMPS,TAIL/PARKING LAMPS,  ALTERNATOR , IGNITION POWER, TURN SIGNALS, GAUGES and CUSTOM WIRING AS NEEDED

K-20 from $375.00
K-40 from $395.00

Call (610) 754-0720
to order

K-40F Ford WIRING KITS

The K40F kit is custom designed for Ford   products. We focus mostly on 1960 to 1979 trucks however, other vehicles  are possible. You need to call  610 754-0720 for advice and  availability.

This kit included Ford headlamp, ignition and dimmer switches. Stock instrument panel wiring is standard but aftermarket gauge wires are common for us.  
We can accommodate modern Ford alternators and aftermarket ignition systems

Call (610) 754-0720
to order

From $530.00

 CJ5     CJ7   CJ8 HARNESS

Custom CJ harnesses are available for 1976-1983 jeeps. This wiring includes the stock CJ connectors plus special weather-proof connectors for external lamp assemblies. The stainless-steel PDP-1B fuse panel is used to allow additional electrical devices to be added by the owner. 
Options include aftermarket ignition systems and alternators

Call (610) 754-0720
to order

From $630.00

Jeep CJ harness

Centech, Inc.

2190 Colflesh Rd

Perkiomenville, Pa.  18074

610 754-0720

EASTERN TIME

Email

Project CJ
ls-3 engine

bottom of page