Accessories


Catalog Index>Accessories>Switch Knobs

Switch Knob

KR-1 Hotrod Aluminum Knob
Get a new look for your dash with our good-looking and functional KR-1 knobs for your Street Rod or Custom Car. The KR-1 can replace virtually any knob, such as the headlamp or wiper knob you have now. Beautify your stock or modified dash board when you rebuild and rewire your vehicle.

Each 1" x 1" diameter knob has a .125 (1/8") opening and uses a 6-32 set screw to hold the knob fast to the shaft. If your switch shaft differs in size, simply drill the knob to a larger diameter to fit your shaft and lock with supplied set screw. The set screw makes for easy removal if necessary. The headlight switch kit assembly HLS-1R includes the switch, knob, shaft and special dash installation nut.

Mounting the switch is easy!

Special dash installation nut for GM Switch
Allen Wrench Not Included

The GM headlamp switch has a female thread which the installation nut screws into. To mount the switch, simply drill a 7/16" hole through the dash and fasten the switch to the dash with the installation nut using the allen wrench and tighten, That's it. This item is NOT for the Jeep headlamp switch which uses an original chrome retaining nut.

Product Ordering Information
Order
Item
 Item
Description
List
Price
Online
Price
No pricing information is available, Please Call


Top of Page